A Banner For Margo

web_whole banner blue door angle from left.jpg
web_bird close up right side.jpg

One of my great friends from college just had a baby! Yay! She lives far away and I wanted to send her something special, since I can't descend upon her and give her and her baby in-person love. I decided to make a banner using blackbirds, an image that she uses in her own work, and also used my embroidery skills that have been closeted for far too long.

It felt pretty good to get the box of embroidery floss out and flex my stitching muscles. I used a big variety of stitches on the banner and I'm going to show you how to do one of my favorites, the Japanese Darning stitch. That's the stitch I used  in that background of the sash that the birds are holding.

The history of darning, repairing or reinforcing worn or damaged fabric, is widespread and was a normal practice before buying new clothes was as easy as buying groceries in the grocery store down the street. Different cultures took on different styles, one of the more decorative and better known styles is sashiko from Japan. I did some quick research to see what the history of this particular stitch is and couldn't find anything specific. Based on the generalized name, my best guess is that the "Japanese Darning Stitch" is a westernized simplification of those Sashiko techniques or a style related to them.

History aside, I chose to share this stitch because of the texture it provides, and the neat detailed shapes, plus the infrequency of use; I don't see it very often. Like Maria Von Trapp says "Let's start at the very beginning," with the basic darning stitch.

The Darning Stitch

I used different colors to help differentiate rows and steps, hopefully easier for you to visualize. All of these pictures can be clicked on so you can get a closer look.

Start your needle with a knotted thread at the back of your fabric

Bring it through to the front. Use the needle to pick up a few threads, bring the needle across the fabric, now pick up a few more threads, and pull the thread all the way through; repeat until the end of your row. The difference between the darning stitch and the running stitch is the darning stitches are long with small smaller spaces in between and a running stitch has even stitches and spaces.

The next row is going to be off center from the first, meaning the new stitch will be centered over the previous row's space, and this row's space is centered over the last row's stitch.

Here is a picture with lines drawn over the stitches, showing you how the stitches and spaces are aligned. Again, you can click on this to make it bigger.

Fill in your shape with the darning stitch.

Now we'll add in the next steps to make it a Japanese Darning stitch...

Japanese Darning Stitch

Pull the thread through at the right side of a stitch (purple row). In the row above (orange), insert the needle in one side of the space where the thread goes behind the fabric, bring the needle back to the front of the fabric at the same place as the row's stitch comes forward.  Pictures are below each instruction.

Bring the thread to the first row (purple), thread it through the space where the original row (purple) goes behind the fabric.

Back to the orange row, follow the orange thread behind the fabric and back out again. Repeat these steps to the end of the row.

Once you finish the row, bring the thread the left of an orange stitch, go the the next row (purple) and do the same steps in reverse. Follow the purple thread behind and then in front of the fabric.

Now, back down to the orange row, bring the thread behind the fabric with the orange thread, and then back to the front. Now you'll start to see the hourglass shapes form.

Continue across the row, proceed to the next row and finish filling in your shape.

 

That is the basic structure for the Japanese Darning stitch. If your stitch ends at a funny spot on the edge, just fill in the missing spaces with single stitches.

Here is the stitch completed over an area in the three color version, and then the single color for comparison.

Do you think you can use this stitch in your own work? I love the look when you fill in large spaces with it. You can even use it as a base and then work on top. Now get stitchin'!

Things we used in this project:

Making Your Own Tiny Treehouse

mini treehouse closeup for plants

I never had a treehouse growing up, but that didn't stop me from dreaming about what my ideal treehouse would include. I even had drawings that included my dream treehouse that doubles as a home for my dream pets, gibbons. Yes, I dreamed of sharing my treehouse with gibbons. I didn't take into account the cleaning up after monkeys part of this but that's what dreams are for.

My treehouse fascination hasn't really subsided, I asked for Treehouses of the World for my 15th birthday. The author, Pete Nelson, has a TV show, Treehouse Masters and I love it! I maintain that I will get my treehouse one day but for now I came up with a substitute that can live amongst my indoor trees, my houseplants.

You can make a mini treehouse for your houseplants and terrariums too!

Supplies

Materials

Template
Iron on Veneer (there are many sizes and colors veneer, I chose this type because it was available at the local hardware store. Project can be adjusted to whatever type you find.)
Cardstock
Acrylic Paint
Gorilla Glue Pen
3/16" Dowel Rod (or similar size)
 

Tools and Household Items

Scissors
Iron
Press Cloth (this is just a scrap rag that goes between your iron and the material you are ironing)
Small Clamps
Utility Knife
Twine
Tape
Metal Ruler
Drill
3/16" Drill bit (same size as your dowel rod)

Directions

The first step is to download the template and cut out the pieces. 

Now, heat up your iron to the cotton setting and cut 4 strips of the veneer that are 1/2" longer than the main piece of the template.

Lay the first piece of veneer on your cardstock, glue side down, cover with your press cloth (protects your iron from any extra glue) and apply heat from your iron until the veneer is stuck to the paper (15-30 seconds). Use a pen or a bone folder to run over the veneer to even out the glue and the seal.

Add the next strip of veneer, slightly overlapped with the first piece, and apply heat from the iron (use your press cloth!). Repeat with the next two pieces.

Make sure that this creates a surface that is big enough for your template to fit on and not extend beyond the edges of veneer. If it isn't big enough, just add another strip of veneer.

web_template on veneer.jpg
web_utility knife ruler and template.jpg

Use double stick tape, or tape loops to fasten your template to the veneer.

The trick here is to go nice and slow. You're going to use your utility knife and ruler to cut around the edge of the template. Line the ruler up with the edge and use it as the guide for your knife.

Some general safety guidelines: When you use the ruler as a guide, make sure the ruler is on the side with the most material, and you cut on the side with less area. This just gives you more material to hold onto and it's safer to cut. See the pictures below.

Incorrect, with ruler only covering the sliver being cut off.

Incorrect, with ruler only covering the sliver being cut off.

Correct, with ruler on the side with most material and cutting off a small sliver. If you are left handed this is perfect, if you are right handed, rotate so your left hand holds the ruler and your right hand wields the knife.

Correct, with ruler on the side with most material and cutting off a small sliver. If you are left handed this is perfect, if you are right handed, rotate so your left hand holds the ruler and your right hand wields the knife.

The second safety consideration is about using the utility knife. You are not going to cut this in one fell swoop. You have much more control if you cut it in many shallow cuts. Each edge could take 5-10 swipes to cut through the veneer and the paper. Just be patient, it's not worth slicing your finger to finish the project. If you start to get frustrated, just walk away for a few minutes and come back to it.

After the shape is cut out you can score the fold lines using the same knife and ruler. Scoring is cutting through the top layers of material to make folding easier. You don't cut all the way through. For comparison, this stage will take about 2-3 swipes with the knife.

web scored.jpg
web_scored bent.jpg

Carefully fold along the score marks, apply glue to the wall tab and clamp closed for about 30 minutes. Wipe excess glue off of the edge while it's wet. I chose this glue because it's waterproof and will hold up to the moisture from plants, but it does dry white and it expands, so use it sparingly and wipe off excess while it is still wet.

While the house is drying, cut four short strips for the roof and iron the veneer on the cardstock in the same layered fashion used for the main part of the house. After the drying time, add glue to the roof tabs and lay the roof on top of the house. I couldn't figure out a good way of clamping the roof to the top, so I went with the old school method of wrapping the house in twine to firmly hold the roof in place. Again, wipe excess glue while it is wet.

web_roof tabs.jpg
web_treehouse twined.jpg

While the roof is drying, you're going to iron the veneer for the porch. For this application, iron on the veneer side by side. It will look more like decking as opposed the siding of the house. To protect the backing paper from moisture and to add strength, on one side the veneer will lay up and down and on the back the veneer will lay left to right (perpendicular). This will prevent the deck from buckling when we attach the stick, or over time from moisture.

Since the porch veneer is thinner, I used some junky scissors (so the veneer wouldn't dull sharp scissors) to cut the porch out.

Side by side veneer, on the OPPOSITE side the veneer lays perpendicular

Side by side veneer, on the OPPOSITE side the veneer lays perpendicular

Using scissors to cut out porch

Using scissors to cut out porch

Use the glue and twine method to attach the house to the porch.

Once the house is attached after the drying time, use acrylic paint to add details to your house. I added windows with green edging and used some gray paint to represent the reflections on glass. I added a pop of color with a red door and then used green and brown in splotches to add some moss on the roof. You could glue natural materials on to your house to add character, like moss or small twigs; I wanted to wait to see how the house ages in the plant environment before I add too much.

web_painted treehouse 1.jpg
web_painted treehouse 2.jpg

Wait 24 hours to make sure that your house and all the glue has time to completely dry. Use your drill with a drill bit matching the size of your dowel. Drill the hole where it will be hidden by the house and the end of the dowel will be inside the hollow part of your house. Go slow and be careful not to drill through your roof or your hand for that matter.

Next, add some glue to the edges of the drilled hole and fit the dowel rod into the hole. Leave it for a few hours for the glue to dry.

web treehouse mini drill.jpg
web_treehouse dowel glued.jpg

Now add your house to a potted plant or terrarium! Make this project, add your own spin and share your results with us!

We're on twitter and instagram! Follow us! Share your version of the Tiny Treehouse!

Cold Hands, Warm Heart? I Think Not.

So today is the fifteenth, a month out from Valentines Day and the time I've deemed it acceptable to start filling my house with pink and red.

Whatever your feeling is towards Valentine's Day, and the stupid pressure placed on the actual day, don't you agree it is a great time to fill your home with color and forget about the freezing temperatures outside? It is something happy to focus on, at least it is for me, a person who lists pink and red towards the top of their novel length list of favorite colors.

Back to the "cold hands, warm heart" statement; whoever started that saying must have been crazy. Cold hands and feet are the first thing that ruins any kind of winter fun for me. I have a few distinct memories of being miserable in the snow and the most vivid feeling I have about those memories are my feet and hands, so cold they feel like they're burning. I think those occurrences happened one too many times, because at this point I wouldn't say I like to play in the snow. I think it is beautiful as long as I can stay inside and look at it, but I don't want to build anything out of it, walk, or drive through it. Maybe this little DIY will make me change my mind. 

A few years ago, a family friend made those rice filled, heat bags for Christmas. If you're unfamiliar with them, you dampen the cloth bag that is filled with rice and place it in the microwave for a minute. The bag provides a nice, moist, heat to help aches and pains, or in my case, warmth to a perpetually cold body. The rice inside holds the heat for a surprisingly long time and the weight of the bag is such a nice comfort.

I thought that a smaller version of the heat bags would be great for pocket warmers, and considering the holiday approaching I decided to make them heart shaped.

I'm spoiled, and use a sewing machine for things like this, but it isn't a project so large that you couldn't hand sew if you choose to. If you are hand sewing, make sure your stitches are small enough that your rice will stay put inside the bag.


Supplies

Fabric (I used felt and cotton print cloth)
Thread
Scissors
Rice

Optional Supplies
Pinking Shears
Sewing Machine


Directions

Layer two pieces of fabric, and cut out a heart shape. Your heart should be about palm sized, perfect size to fit in your pocket. If you choose to, use your pinking shears to trim the edges of your hearts. 

Start sewing around the edge of both of your hearts, right sides facing out, 1/4"-1/2" from the edge. Stop sewing an inch from your starting point, leaving a gap to pour rice inside of the heart. 

Use a funnel to fill the heart with rice. Do not overfill the heart, the rice inside should be able to move around and you should be able to sew the opening closed without any trouble. 

After you sew the heart closed, snip the excess strings. You have a finished hand warmer!

To use the hand warmers, spritz with water, and heat in the microwave for 15-30 seconds. Put the hand warmers in your pocket on the way out the door and enjoy your non-icicle fingers.

Your hand warmers will stay warm for about 20 minutes, and can be reused and reheated over and over.

Stay Warm!!!